Do not press the LED light with sharp hard objects
Release Time：2023-01-10
Do not press the LED lamp 1 with sharp hard objects No live working
The lamp strip is the LED lamp bead welded on the flexible circuit board with special processing technology, and the product is powered on after installation, mainly used for decorative lighting. The common types are 12V and 24V low-voltage light belts. In order to avoid damage to the light belt due to errors during the use and installation operation, it is strictly prohibited to operate with power when installing the light belt products.
2. Storage requirements of lamp strip
The silica gel of LED lamp has moisture absorption characteristics. The lamp band should be stored in a dry and sealed environment. It is recommended that the storage period should not be too long. Please use it or reseal it after unpacking. Do not unpack it before use.
3. Check the product before power-on
Do not power on and light up the entire coil of light belt without removing the coil, packaging or piling it into a ball, so as to avoid serious heat and LED failure.
4. It is forbidden to press LED light with sharp hard objects
The light strip is the LED lamp welded on the copper wire or the flexible circuit board. When the product is installed, it is recommended not to press the LED surface directly with fingers or hard objects. It is forbidden to step on the LED lamp to avoid damaging the LED lamp with the light strip and causing the lamp bead to be damaged.
Keywords：Flexible light strip
Jiangmen Yuhao Lighting Co., Ltd
Specializing in the production of LED flexible neon lights, LED rainbow tube, LED high voltage strip and other LED products to LED flexible neon lights and LEDSMD high voltage strip, LED rainbow tube as the leading constantly develop high-tech products, with the times, the pursuit of excellence.
Contact Us
Add: No.35, Minghui Road, JiangHai Area, Jiangmen
Email：shirleyding@126.com
Sales Manager: Shirley Ding
Please leave a message
Copyright © 2023 Jiangmen Yuhao Lighting Co., Ltd